Fast OS Boot x Wi-Fi Link Solution


The low power solution combining fast OS boot and Fast Wi-Fi link

This is a low power consumption solution for IoT products combined with Ubiquitous AI corporation's fast OS boot solution "QuickBoot" and Murata Wi-Fi module "Type-1PJ" supporting fast Wi-Fi link specification "IEEE802.11ai".

The product can boot with "QuickBoot" from the power off state in a few seconds, and it can connect to the "IEEE802.11ai" access point in less than 0.1 second.

By reducing the time from OS startup to Wi-Fi connection, Minimize activated state duration to avoid unnecessary current consumption and maximize power consumption reduction.

Application examples for surveillance cameras

Image:Application examples for surveillance cameras

When a problem such as invasion of a suspicious person occurs, the surveillance camera needs to record a high resolution image and immediately send a large amount of data to the server. In the conventional technology, since the platform must always be in the activated state and the Wi-Fi connection must also be maintained, power consumption is high and it needs the power line.

By "Fast OS Boot x Wi-Fi Link Solution", power consumption can be reduced to the utmost limit, releasing customer products from the power supply line.


  • Maximize power consumption reduction by turning off the MPU in the normal state, activating PMIC and sensors only
  • Enable fast OS boot with "QuickBoot" in about 3 seconds when the sensor detects a problem
  • Establish a Wi-Fi connection at a high speed in less than 0.1 second in accordance with the "IEEE 802.11ai" standard
  • Transfer large data to the server in a short time with Wi-Fi broadband data communication (200 Mbps)


Various high-speed technology realizing low power consumption

Murata Type-1PJ

Wi-Fi / BT combo module adopted Qualcomm QCA9377 chip supports IEEE802.11ai standard

Ubiquitous QuickBoot

New technology that can boot Linux / Android OS in just seconds and restore it to the application execution state

Low power consumption by combining fast OS boot and fast Wi-Fi link

The combination dramatically reducing power consumption by fast OS boot and fast Wi-Fi link from the power OFF state as needed

The collaboration with Ubiquitous AI corporation

One-stop solution based on the partnership with Ubiquitous AI Corporation and Murata for customer platform


Hardware Specifications

Part Number
WLAN Qualcomm QCA9377-3
WLAN IEEE802.11a/b/g/n/ac, 1x1
Bluetooth🄬 Ver.4.2+EDR, Class 1
Interface SDIO3.0 (WLAN) & UART/PCM (BT)
Dimensions (mm) 7.2 x 7.4 x 1.25 mm
Shield/Mold Shielded Resin
Operating Temp. (℃) -30 ~ +85 ℃
Certification FCC/IC Certified

Solution configuration

Hardware & software Components

Murata:Wi-Fi+Bluetooth Module "Type 1PJ"Open in a new window

Ubiquitous AI Corporation:Fast Boot Solution for Linux and Android "Ubiquitous QuickBoot" (*External Site)Open in a new window


Please make inquiries about our solutions introduced here using the contact form below.


Related products and software

Solution Technologies